Filter
Top Products
3–10
3.5.2 M-100B™ Computer Programming Mode
How to Enter the Program Mode
1. Press the ON/OFF switches until both displays of cooking computer indicate OFF. Press the
left product selection switch and the left
1
and
2
cook switches simultaneously. Release all
three switches at the same time.
2. When the program mode has been entered, the display will flash M-100B computer
briefly, followed by the software version number. After a few seconds, Fr fries yes or
Fr fries no will be displayed, depending upon previous program settings.
How to Reset the Computer to the Factory Defaults
While in the program mode, press all 4 cook switches (left and right
1
and
2
) simultaneously to reset
the computer to the factory defaults. See How to Enter the Program Mode above. Updating
menu will flash in the display, followed by epra cleared and cooks cleared.
After a few seconds, Fr fries yes will be displayed, indicating that the computer has been
reset to the factory defaults.
How to Change the Shake, Pull, Or Quality Times for Menu Items
1. Enter the program mode. (See How to Enter the Program Mode above.)
2. Press and release the switch until the product to be changed appears in the left display.
3. Press and release the switch until the function to be changed (SHAKE, PULL, or QA)
appears in the left display. The current time setting and automatic (AUTO) or manual (MAN)
alarm cancel mode options appear in the right display.
NOTE: Shake Time refers to the programmed time at which the operator will be prompted by an
audible alarm to shake the basket, but not stop the cooking process. Pull Time refers to the
programmed time at which the product is fully cooked and at which the operator will be prompted
by an audible alarm to remove the basket from the cooking oil. QA Time refers to the maximum
time that a product may be held after the cooking cycle has completed.
NOTE: When the programmed time has elapsed, the automatic alarm-cancel mode (AUTO)
audible alarm will sound three times and then stop. When the programmed time has elapsed, the
manual alarm cancel mode (MAN) audible alarm will sound until the operator presses the cook
switch (
1
or
2
) that was pressed to start the cooking cycle.
4. Press the right
2
switch to toggle between automatic alarm cancel mode (AUTO) and manual
alarm cancel mode (MAN).