Filter
Top Products
7-3
7-3: REPLACE TRANSFORMER
1. Unplug all power cords. Perform Procedure 7-1, Steps 1-4, Replace Computer/Controller.
2. Remove all wiring from the terminals of the
transformer to be replaced.
3. Remove the screws that secure the
transformer to the component box.
4. Install the new transformer by reversing the
preceding procedures. Make sure you
reconnect the wiring to the proper terminals
and the harnesses to the correct connectors.
7-4: REPLACE TEMPERATURE PROBE
1. Unplug fryer from the electrical source.
2. Drain the cooking oil from the frypot.
3. Remove the fryer from the exhaust hood to gain access to the rear of the fryer.
4. Remove the screws from the top, center and
bottom back covers. Set the covers and
screws aside.
5. Remove the screws securing the tilt housing
cover. Set the tilt housing cover aside.
Screws securing transformers
Screws securing back covers and tilt housing