Filter
Top Products
13
1 Preparing and using for the first time
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’ ‘16°dH’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
g T Turn the Rotary Switch to change the water hardness
setting, e.g. to
‘25°dH’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank.’
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling.’, the system fills up with water.
‘Welcome to JURA’
‘Machine is heating.’
‘Press the Rotary Switch.’
, the Rotary Switch lights up.
T Place a receptacle under the coffee spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, water flows out of the coffee spout. The
rinse stops automatically.
‘Please select product:’ appears on
the display. Your IMPRESSA is ready for use.
First-time use without filter
cartridge activation
NOTICE