Filter
Top Products
36
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings(6/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings(5/7)’/ ‘Units’ you can select
the unit used for the amount of water.
Example:Proceed as follows to change the unit for the amount of
water from
‘ml’ to ‘oz’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Machine
settings(5/7)’
is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(5/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings (5/7)’ you can make the
following settings:
U
‘Display’ (as percentages)
Change the brightness of the display.
U
‘Colour scheme’
U
Change the background of the display.
Example: Proceed as follows to change the background of the
display.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Machine
settings(5/7)’
is displayed.
Unit for amount of water
Display settings