Filter
Top Products
27
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the P button to enter programming mode. You can navigate
through the program items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Program item Sub-item Explanation
‘Maintenance
status (1/7)’
‘Clean’,
‘Descale’ (only if filter is
not activated),
‘Change the filter’ (only if
filter is activated),
‘Clean the milk system’
T Start the required maintenance program here.
‘Maintenance
status (2/7)’
‘Rinse the coffee system’,
‘Rinse the milk system’
T Start the required rinse here.
‘Product settings
(3/7)’
‘Programming’,
‘Classic-library’
T Select your settings for specialty coffees, milk
and hot water.
T Change the products assigned to the multi-
function buttons and product selector.
‘Machine settings
(4/7)’
‘Choose language’,
‘Switch off after’,
‘Save energy’,
‘Factory setting’
T Select your language.
T Set the time after which the IMPRESSA should
switch off automatically.
T Select an energy-saving mode.
T Reset the machine or the permanently set
values of all products to the factory settings.
‘Machine settings
(5/7)’
‘Units’,
‘Display’,
‘Colour scheme’
T Select the unit for the amount of water.
T Change the display settings.
J WARNING