Filter
Top Products
21
2 Preparation
T Press the ‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Product settings’).
Coffee preparation starts. The preset amount of water for
espresso flows into the glass.
Preparation stops automatically.
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Example:Proceed as follows to prepare hot milk at the touch of a
button.
Precondition:
‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
position z.
E If you want to prepare milk foam, turn the setting wheel of
the cappuccino frother to the Milk Foam position ü.
T Press the
‘1 portion milk’ button.
The hot milk is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the cappuccino frother’). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Warm milk and milk
foam