Filter
Top Products
17
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
E While a product is being prepared, you can stop preparation
at any time. Just press any button.
E During preparation, you can change the preset amounts by
turning the Rotary Switch g.
E You can follow the current status of preparation on the display.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend
prewarming the cups. The full coffee aroma can develop only in
prewarmed cups. You can purchase a JURA cup warmer from your
specialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The IMPRESSA offers various ways of preparing a specialty coffee,
milk or hot water:
U
At the touch of a button: Simply press the corresponding
preparation button for the product shown on the display
(start screen) that you want.
The following products are displayed as standard on the start
screen:
U
‘Espresso’
U
‘Coffee’
U
‘Cappuccino’
J WARNING
Ways of preparing a
beverage