Filter
Top Products
39
5 Maintenance
You can initiate the rinse operation manually at any time.
Precondition:
‘Please select product:’ is displayed.
T Place a receptacle under the coffee spout.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Maintenance
status(2/7)’
is displayed.
T Press the
‘Rinse the coffee system’ button.
‘Machine is rinsing.’, water flows out of the coffee spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
After each milk preparation, the IMPRESSA prompts you to rinse the
milk system.
Precondition:
‘Rinse the milk system.’ is displayed and the Rotary
Switch lights up.
T Place a receptacle under the cappuccino frother.
k T Press the Rotary Switch.
‘Milk system is being rinsed.’, the cappuccino frother is
rinsed.
The rinse stops automatically.
‘Please select product:’
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T Use only original JURA milk system cleaner.
Rinsing the machine
Rinsing the cappuccino
frother
Cleaning the cappuccino
frother
J WARNING