Jura Capresso Z9 Coffeemaker User Manual


  Open as PDF
of 60
 
29
4 Permanent settings in programming mode
Product Temperature Coffee strength Amount
Portion of milk – – Amount of milk:
‘3sec.’–‘120sec.’
Hot water ‘X high’,
‘Normal’,
‘Low’
– Volume: ‘0.5oz’–‘15.0oz’
(25 ml – 450 ml)
Example:Proceed as follows to change the amount of milk for a
latte macchiato from ‘16sec.’ to ‘20sec.’, the interval from ‘30sec.’
to
‘40sec.’ and the amount of water from ‘1.5 oz’ (45 ml) to ‘1.0 oz’
(40 ml).
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g TTurn the Rotary Switch until the program item ‘Product
settings(3/7)’
is displayed.
T Press the
‘Programming’ button.
‘Programming’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the
‘Latte macchiato’ button.
T Press the
‘Amount of milk’ button.
g T Turn the Rotary Switch to change the setting for the amount
of milk to
‘20sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
g T Turn the Rotary Switch to change the setting for the interval
to
‘40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Volume’ button.
g T Turn the Rotary Switch to change the setting for the amount
of water to ‘1.0 oz’ (40 ml).
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
 previous next