Filter
Top Products
35
4 Permanent settings in programming mode
U
‘Rinse the milk system’/ ‘Automatic’
U
Milk system rinsing is automatically initiated approx.
30 seconds after preparation of a specialty coffee with milk.
Example:Proceed as follows to make the machine rinse the milk
system automatically after preparing a specialty coffee with milk.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Maintenance
settings(6/7)’
is displayed.
T Press the
‘Rinse the milk system’ button.
‘Rinse the milk system’
T Press the ‘Automatic’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings(6/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
E If you are using the CLEARYL Blue filter cartridge and have
activated it, it is not possible to set the water hardness.
The harder the water is, the more frequently the IMPRESSA needs
to be descaled. It is therefore important to set the water hardness
accurately.
The water hardness can be adjusted on a continuous scale between
1°dH and 30°dH.
Example:Proceed as follows to change the water hardness from
‘16°dH’ to ‘25°dH’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Maintenance
settings(6/7)’
is displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
g T Turn the Rotary Switch until ‘25°dH’ is displayed.
Setting the water
hardness