Filter
Top Products
32
4 Permanent settings in programming mode
U
‘Save Level 2’
U
After switching on, your IMPRESSA is ready for use for all
specialty coffees with and without milk, as well as hot water.
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
‘Energy Save’ is
displayed.
U
‘Save No’
U
All specialty coffees, specialty coffees with milk and hot
water can be prepared without having to wait.
Example:Proceed as follows to change the energy-saving mode
from
‘Save Level 1’ to ‘Save Level 2’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Save energy’ button.
‘Save energy’
T Press the ‘Save Level 2’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings(4/7)’
O T Press the P button to exit programming mode.
‘Please select product:’
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time
following the last action on the machine.
You can set the automatic switch-off for 15minutes, 30minutes
or 1–15hours.
Example:Proceed as follows to change the switch-off time from
‘2hrs.’ to ‘1hrs.’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
Automatic switch-off