Filter
Top Products
28
4 Permanent settings in programming mode
Program item Sub-item Explanation
‘Maintenance
settings(6/7)’
‘Filter’,
‘Water hardness’ (only if
filter is not activated),
‘Switch-on rinse’,
‘Rinse the milk system’
T Indicate whether you are operating your
IMPRESSA with or without a CLEARYL Blue filter
cartridge.
T Adjust the water hardness.
T Change the settings for the switch-on rinse
and milk system rinse.
‘Information (7/7)’ ‘Product counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and
view the number of maintenance programs
performed.
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
In the program item
‘Product settings(3/7)’/ ‘Programming’ you can
make individual settings for all specialty coffees, milk and hot water.
The following permanent settings can be made:
Product Temperature Coffee strength Amount
Ristretto,
espresso,
coffee,
special coffee
‘High’,
‘Normal’,
‘Low’
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Volume:
‘0.5oz’–‘8.0oz’
(25 ml – 240 ml)
Two ristretti,
two espressi,
two coffees
‘High’,
‘Normal’,
‘Low’
– Volume: ‘0.5oz’–‘8.0oz’
(25 ml – 240 ml) (per cup)
Latte macchiato,
cappuccino
‘High’,
‘Normal’,
‘Low’
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Amount of milk:
‘3sec.’–‘120sec.’
Interval: ‘0sec.’–‘120sec.’
Volume: ‘0.5oz’–‘8.0oz’
(25 ml – 240 ml)
Product settings
J WARNING