Filter
Top Products
30
4 Permanent settings in programming mode
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Product settings(3/7)’/ ‘Classic-library’ you will
find all the products stored as standard in your IMPRESSA. You can
move any of these products to your preferred position on the start
screen and make it one of your favourites.
You can also change the products shown in the product selector. To
do this, go to the program item
‘Product settings(3/7)’/ ‘Program-
ming’
and press the ‘Remove from product selector’ button to
delete a product or products. In the program item
‘Product
settings(3/7)’
/ ‘Classic-library’, press the ‘Add to product selector’
button to add a product or products again.
Example:The
‘2 espressi’ product appears in the bottom right-hand
corner of the start screen.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the program item ‘Product
settings(3/7)’
is displayed.
T Press the
‘Classic-library’ button.
‘Classic-library’
E Next select the button of the product you want to move to the
start screen. No product is prepared at this point.
E Select the
‘No product’ button if you want to leave a position
on the start screen empty.
T Press the
‘2 espressi’ button.
T Press the
‘Next’ button.
T Press the
‘Add to favourites’ button.
‘Select position’
T Press the button at the bottom right.
‘Do you want to replace the current product?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘2 espressi’
O T Press the P button to exit programming mode.
‘Please select product:’
Adding products to the
start screen