Filter
Top Products
15
1 Preparing and using for the first time
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the bean container cover.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8°C). We would therefore
recommend using a milk cooler or a vacuum milk container.
T Remove the red protective cover from the cappuccino
frother.
T Attach the milk pipe to the cappuccino frother. To do this,
attach the end of the milk pipe to the connector on the left-
hand side of the cappuccino frother. Use the short pipe for
a milk container and the long pipe for a milk carton.
Filling the water tank
NOTICE
Connecting milk