Filter
Top Products
12
EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide
Installing the DS-16M and DS-32M Rails
DS-32M Rails Installation
There are two different length rails: the short rails range from 20.5
inches to 27 inches. The long rails range from 27 inches to 34 inches.
Each kit contains two different length rear rail mounts. Use the rail
length that is appropriate for your rack/cabinet.
The front and rear flanges of the DS-32M rails have four screw holes.
See the figure below.
NOTE: If you are installing both a DS-16M2 and DS-32M2 switch, the
DS-16M2 should be positioned at the top of the rack/cabinet, located above
the DS-32M2 switch.
DS-32M Short Rails
DS-32M Long Rails
Front
Front
Rear
Rear
(for the CLARiiON Rack/Cabinet)
(for 3rd Party Racks/Cabinets)
Front Flange
Rear Flange