Filter
Top Products
6
EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide
Installing the DS-16M and DS-32M Rails
DS-16M Rails Installation
There are two different length rails: The short rails range between
20.5 inches to 27 inches. The long rails range from 27 inches to 34
inches. Each kit contains two different length rear rail mounts. Use
the rail length that is appropriate for your rack/cabinet.
The front and rear flanges of the DS-16M rails have three screw holes.
See the figure below.
If you are installing both a DS-16M2 and DS-32M2 switch, the DS-16M2
should be positioned at the top of the rack/cabinet, located above the
DS-32M2 switch.
Select the appropriate length rails, and follow the steps below to
install them.
DS-16M Short Rails (for the CLARiiON Rack/Cabinet)
Front
Rear
DS-16M Long Rails (for 3rd Party Racks/Cabinets)
Rear
Front
DS-16M Front Flange
DS-16M Rear (u-shaped) Flange