Filter
Top Products
EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide
13
Installing the DS-16M and DS-32M Rails
Select the appropriate length rails, and follow the steps below to
install them.
1. Assemble the rails.
The rails assembly consists of an adjustable rail, a C channel, and
two washers and nuts. See the figure below.
a. Insert the threaded posts on the C channel into the slot on the
adjustable rail.
b. Secure the rail to the C channel with two #10 flat washers and
M5 kep nuts. Leave the nuts finger-tight.
2. Determine where in the rack/cabinet you are going to locate the
switch.
The left/right orientation of the rails is determined by the
location of the word “top” on the C channel. The rail is oriented
correctly when the word “top” is up and toward the rack/cabinet
front. See the figure below.
C channel
Adjustable rail
"Top" up and to the
rack/cabinet
front