Filter
Top Products
Fig. 60
u
Unscrew retaining plates
Fig. 60 (1,4)
and remove rail
Fig. 60 (3)
.
u
Fit retaining plate
Fig. 60 (1)
to the lower part of the
hinge side by inserting two screws
Fig. 60 (2)
into the pre-
cut holes.
u
Slide rail
Fig. 60 (3)
into the retaining plate
Fig. 60 (1)
from above.
u
Push second retaining plate
Fig. 60 (4)
onto the rail from
above and screw onto the center of the side wall.
u
Push third retaining plate
Fig. 60 (4)
onto the rail from
above and screw onto the top part of the side wall.
Join appliances:
Fig. 61
u
Position the appliances next to each other with a gap of
approximately 13/32 '' (10 mm) such that they are flush
at the front.
u
Open the door.
Fig. 62
u
Loosen covers
Fig. 62 (10)
using a screwdriver and pull
inwards to remove.
Side-by-side installation
29