Filter
Top Products
WARNING
Electrical shock hazard!
This appliance is equipped with a three-prong (grounding)
polarized plug for your protection against possible shock
hazards. Electrical Grounding Required.
u
Do not remove the round grounding prong from the plug.
u
Do not use a two-prong grounding adapter.
-
Wait 1 hour after installation before you plug in the
appliance. This allows the refrigerant and system
lubrication to reach equilibrium.
-
Make sure incoming voltage is the same as the
appliance rating. A 110-120 Volt, 60 Hz, 15 Amp
electrical supply (20 Amp for side-by-side installations)
circuit that is controlled by a circuit breaker or fuse is
required.
-
We recommend using a dedicated circuit for this
appliance to prevent electrical overload.
-
Follow all Federal, State and local electrical, fire and
building codes and ordinances when installing the
receptacle and / or the appliance.
-
In some communities, a wall switch is required to turn
power to the appliance ON and OFF.
-
To reduce the risk of fire, electric shock, or personal
injury, installation work and electrical wiring must be
done by a qualified electrician in accordance with all
applicable codes and standards, including fire-rated
construction.
-
You are advised to clean the appliance before
switching it on the first time .
-
The top of the electric outlet must be located within
82-5/8 in. (2100 mm) from the top of the base in the
cabinet.
Connecting the appliance
34