Fig. 68
u
Open the door.
u
Position ventilation grille
Fig. 68 (30)
over the installation
contour
Fig. 61 (14)
and align it such that the holes in
ventilation grille and installation contour are above
each other.
u
Screw ventilation grille
Fig. 68 (30)
to installation contour
from below using four screws
Fig. 68 (31)
.
Fit end strip:
Fig. 69
u
Open the door.
u
Position end strip
Fig. 69 (30)
over the installation
contour
Fig. 61 (14)
and align it such that the holes in
ventilation grille and installation contour are above
each other.
u
Screw end strip
Fig. 69 (30)
to installation contour from
below using four screws
Fig. 69 (31)
.
Secure side installation strip:
Fig. 70
u
Remove adhesive tape from the side installation strip
Fig. 70 (3)
.
u
Push installation strip
Fig. 70 (3)
upwards until it is
touching the ventilation grille
Fig. 70 (30)
.
u
Glue the adhesive plates
Fig. 70 (40)
above the retaining
plate
Fig. 60 (1)
and the retaining plates
Fig. 70 (4)
respectively to the installation strip
Fig. 70 (3)
such that
it cannot slide downwards.
Install the appliance in the recess:
u
Connect appliance to the water supply (see 10) .*
u
Insert the power cable into the socket (see 15) .
Fig. 71
u
Push the appliance into the recess until the rear edge
of the ventilation grille
Fig. 71 (30)
is flush with the front
edge of the side wall of the cabinet.
u
Open the door.
Side-by-side installation
31