Filter
Top Products
4 Cabinet Opening Dimensions
Fig. 6 Single installation
Fig. 7 Side-by-side installation:
The door must be able to be opened at least 90° to allow
the drawers to be pulled out properly. If the door opening
angle is 90° it may be difficult to remove the drawers due
to the door racks.
If the appliance will be installed in a corner please leave a
gap of at least 3-3/4 in. (95 mm) from the wall.
If thick front panels are used, the gap may have to be
greater. (see chapter on décor panels)
5 Air circulation in the kitchen
cabinet
This is a built-in refrigerator-freezer with custom finished
door panels.
The unit is not intended for freestanding use and has to
be installed inside a cabinet. This type of cabinet must be
carefully constructed using the proper dimensions and it
must provide proper ventilation to ensure proper
appliance operation.
Cabinet Opening Dimensions
7