Panasonic NN-CT569M Microwave Oven User Manual


 
En-6
Control Panel
Beep Sound:
A beep sounds when a pad is pressed. If this beep does not sound, the setting is incorrect.
When the oven changes from one function to another, two beeps sound. After the completion of
the preheating on Convection or Combination mode, three beeps sound. After completion of
cooking, five beeps sound.
(1)
(2)
NN-CT569M / NN-CT559W
(3)
(4)
(5)
(6)
(7)
(10)
(14)
(9)
(11)
(13)
(8)
1. Display Window
2. Time Pads
3. Microwave Power Pad
4. Grill Power Pad
5. Convection Pad
6. Combination Pad
7. Auto Defrost Pad
8. Weight Select Pads
9. Clock Pad
10. Delay/Stand Pad
11. Auto Weight Program Pads
12. Auto Weight Combi Program Pads
13. Start Pad:
Press to start operating the oven.
If during cooking the door is opened or
Stop/Cancel Pad is pressed once,
Start Pad has to be pressed again to
continue cooking.
14. Stop/Cancel Pad:
Before cooking: one press clears
your instructions.
During cooking: one press
temporarily stops the cooking
program. Another press cancels all
your instructions and the time of day
will appear in the display.
N.B:
If an operation is set and start pad is not
pressed, after 6 minutes, the oven will
automatically cancel the operation. The
display will revert back to clock mode.
This oven is equipped with an energy
saving function.
Please Note:
1. When in stand-by mode the brightness
of the display will be reduced.
2. The oven will enter stand-by mode,
when first plugged in and immediately
after the last operation has completed.
(12)
The design of your control panel may vary
from the panel displayed (depending on
colour), but the words on the pads will be
the same.
*