Filter
Top Products
7
16. When do not use or completely operation, unplug the power cord.
Note: Before slicing the loaf, use the hook to remove out the Kneading
blade hidden on the bottom of loaf. The loaf is hot, never use the hand to
remove the kneading blade.
Special introduction
1. For Quick breads
Quick breads are made with baking powder and baking soda that
activated by moisture and heat. For perfect quick breads, it is suggested
that all liquids be placed in the bottom of the bread pan, dry ingredients
on top. During the initial mixing of quick bread batters and dry
ingredients may collect in the corners of the pan, it may be necessary to
help machine mix to avoid flour clumps. If so, use a rubber spatula.
2. About Ultra fast program
The bread maker can bake loaf within 1 hour with ultra fast program.
These 2 settings can bake bread in 58 minutes，the bread is a little more
dense in texture. Ultra fast I is for baking 1.5LB bread while Ultra fast II
is for 2.0LB. Please noted ingredient of water should be hot water in the
range of 48—50, you must use a cooking thermometer to measure the ℃
temperature. The water temperature is very critical to the performance of
baking. If the water temperature is too low the bread will not be rise to
expected size; if the water temperature is too high it will kill the yeast
prior to rising, which also will largely affect the baking performance.
Cleaning and Maintenance
Disconnect the machine from the power and let it cool down prior to
cleaning.
1. Bread pan: Rub inside and outside with a damp cloth. Do not use any
sharp or abrasive agents for the consideration of protecting the
non-stick coating. The pan must be dried completely prior to installing.
2. Kneading blade: If the kneading bar is difficult to remove from the axle,
In such an event fill the Container with warm water and allow it to soak
for approx.30minutes.The kneader can then be easily removed for
cleaning. Also wipe the blade carefully with a cotton damp cloth;
Please note both the bread pan and kneading blade are dishwashing
safe components.
4. lid and window: clean the lid inside and outside with a slightly damp
cloth.
5. Housing: gently wipe the outer surface of housing with a wet cloth.
Do not use any abrasive cleaner to clean as this would degrade the
high polish of the surface. Never immerse the housing into water for