Filter
Top Products
MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide
7-22
b. Splice the fuse holder to the end of the red V+ wire, as shown below. Make the distance
from the fuse to the power connection point as short as possible.
Figure 7-12. Connecting Power to Cradle
4. Prepare the cable termination.
a. Red wire: connect to a +12/24 V vehicle power source.
b. Black wire and shield wire: connect to vehicle ground wire or chassis ground.
How the cable terminates depends on the vehicle. If the vehicle has a power
output connector, attach a mating connector to the end of the power cable.
You may be able to connect to a fuse panel with a simple blade terminal or
commercially available connector. Consult the vehicle owner’s manual for
information on how to access the vehicle’s power supply.
5. Connect the power input cable to the power port on the cradle.
Shield wire
(bare wire)
Ground wire
(black)
V+ power (red)
4A fuse and
fuse holder