Filter
Top Products
Part I 1-1
Teledyne Analytical Instruments
Thermal Conductivity Analyzer Part I: Control Unit
Introduction
1.1 Overview
The Model 2010 is a family of split configuration conductivity analyzers.
Each analyzer consist of a Control Unit suitable for installation in a general
purpose area-enclosure rated NEMA-4, and a Analysis Unit which is housed in
an explosion-proof enclosure. The Analysis Unit enclosure is rated for NEMA
4/7 Class I, Div. 1, Groups B,C,D and is approved by U/L and CSA.
The Analytical Instruments Model 2010B Thermal Conductivity Analyzer is
a versatile microprocessor-based instrument for measuring a component gas in a
background gas, or in a specific mixture of background gases. It compares the
thermal conductivity of a sample stream with that of a reference gas of known
composition. The 2010B can—
• measure the concentration of one gas in a mixture of two gases.
• measure the concentration of a gas in a specific mixture of back-
ground gases.
• measure the purity of a sample stream containing a single impuri-
ty or a mixture of impurities.
The standard 2010B is pre-programmed with automatic linearization
algorithms for a large number of gases and gas mixtures. The factory can add to
this data base for custom applications, and the sophisticated user can add his
own unique applications.
This manual section covers the Model 2010B General Purpose flush-panel
and rack-mount control units only.
Many of the Model 2010B features covered in this manual are optional,
selected according to the customers specific application. Refer to the specific
model information sheet (page IV) for the options incorporated in the instrument.