Operation, cont’d
SGS 408 Switcher • Operation3-4
5
Controls — Display the available controls. The configuration options are
available by pressing the Menu button. See “Configuring the SGS 408”
below.
6
Current duration — Displays the currently selected effect’s duration.
7
Current effect — Displays the effect and transition that are specified for the
active input. See “Applying other effects” on page 3-16 for details.
Configuring the SGS 408
To access all the configuration options, you must first enter the LCD menu
system. The default LCD menu appears on power up (figure 3-3).
Figure 3-3 — The default LCD menu
To display the first submenu of configuration options (figure 3-4), press the Menu
button.
Figure 3-4 — Displaying first submenu of options
To display the second submenu of configuration options (figure 3-5), press the
Next button.
Figure 3-5 — Displaying second submenu of options
Press the Exit button to return to the default menu (figure 3-3).
The LCD will always return to the default menu after 16 seconds of
inactivity in any submenu except when in Executive mode.
8 XXX.XX KHz XX.XX Hz Title
4 XXX.XX KHz XX.XX Hz Window
1280 X 1024 @ 60 Hz
True(DVI) only 3.4 Seconds
Menu Center Size Filter Level
Input Out Out Test
Next Config Rate Sync Pattern
Edit Prog
Exit Title Lock LCD Reset
