Operation, cont’d
SGS 408 Switcher • Operation3-10
8. To return the title its original location and size, press the Reset button
(figure 3-18).
Figure 3-18 — Resetting the title box submenu controls
9. To return to the default screen, press the Take button (figure 3-19), then
press the Exit button (figure 3-20), or wait 16 seconds until the submenu
times out.
Figure 3-19 — Returning to the previous submenu
Figure 3-20 — Returning to the default menu
Setting the program keylock
The program keylock control disables the program input buttons. This prevents
anyone from accidentally switching directly to a program input, which would
not be a seamless switch.
To set the program keylock, do the following:
1. From the default menu, press the Menu button, then the Next button, then
the Prog Lock button (figure 3-21).
H Size 0315
V Size 0245
Center Size Reset Take
ECP
Window
Edit Prog
Exit Title Lock LCD Reset
H Size 0315
V Size 0245
Center Size Reset Take
ECP
Window
