Filter
Top Products
Chapter 3 Configuring Cisco CallManager Extension Mobility
Procedures for Configuring Cisco CallManager Extension Mobility
3-6
Cisco CallManager Extended Services Administrator’s Guide
78-12959-01
Procedures for Configuring Cisco CallManager
Extension Mobility
Perform the following procedures to configure Cisco CallManager
Extension Mobility.
Caution For successful configuration of Cisco CallManager Extension Mobility,
perform all the procedures in the order shown and follow all steps thoroughly.
1. Creating a New Application User, page 3-7
2. Configuring the Cisco CRA Engine, page 3-10
a. Adding the Login Application, page 3-10
b. Adding the Logout Application, page 3-13
c. Adding the Login Application Trigger, page 3-15
d. Adding the Logout Application Trigger, page 3-17
3. Configuring Cisco CallManager for Cisco CallManager Extension Mobility,
page 3-19
a. Adding the Login Service, page 3-19
b. Adding the Logout Service, page 3-21
c. Setting the Service Parameters, page 3-23
d. Creating the Default Device Profile for a User, page 3-26
e. Associating a User Device Profile to a User for Cisco CallManager
Extension Mobility, page 3-28
f. Configuring the Cisco IP Phones for
Cisco CallManager Extension Mobility, page 3-30
4. Setting up Anonymous Access on IBM-340 platforms, page 3-34
This section also includes information to give Cisco CallManager
Extension Mobility users. See the “Preparing the User for Cisco CallManager
Extension Mobility” section on page 3-35.