Filter
Top Products
3-21
Cisco CallManager Extended Services Administrator’s Guide
78-12959-01
Chapter 3 Configuring Cisco CallManager Extension Mobility
Procedures for Configuring Cisco CallManager Extension Mobility
Related Topics:
• Adding the Login Application Trigger, page 3-15
• Adding the Logout Service, page 3-21
• Setting the Service Parameters, page 3-23
Adding the Logout Service
To add the Logout Service for Cisco CallManager Extension Mobility, perform
the following steps:
Procedure
Step 1 On the Cisco CallManager 3.1 > Administration page, select Feature.
Step 2 Use the drop-down arrow to select Cisco IP Phone Services.
Step 3 At the Service Name field, enter a name for the service which will identify it for
the user (for example, Logout).
Step 4 At the Service URL field, enter the IP address of the application engine and the
HTTP trigger you created in Step 3 of Adding the Logout Application, page 3-13
(for example, http://AppServerIP: 8080/logout).
Caution The URL is case-sensitive. Make sure you enter the exact name you entered
for the Logout Application Trigger.
Tips Always use port 8080.
See Figure 3-10.