Filter
Top Products
Appendix B Messages
Error Messages
Operating Guide B-5
B
Table B-3. Error Messages (continued)
Message Display RS-232 Description
FRONT PANEL FAIL X The front panel or its interconnecting
cable are defective or not properly
connected.
FPANEL FAIL X
FPGA FAIL X X A failure was detected in the FPGA
(Field Programmable Gate Array).
GPIB FAIL X X A failure was detected in the GPIB
hardware.
HETERODYNE PATH
FAIL
X A failure was detected in the
heterodyne-path circuit.
HET PATH FAIL X
IIC FAIL X X An attempt to write to the LCD display
failed.
INSTCFG FAIL X X The instrument’s configuration data is
missing or has become corrupted.
OVER TEMPERATURE X The Counter’s internal temperature is
above the acceptable limit.
OVERTEMP X
PWR CAL FAIL X X The instrument’s power-calibration data
is missing or has become corrupted.
POWER METER FAIL X A failure was detected in the Channel 2
power-measurement circuit.
PWR CKT FAIL X
RAM FAIL X X A failure was detected in RAM.
ROM FAIL X X A failure was detected in ROM.
SAV SET FAIL X X One or more of the sets of user settings
is missing or has become corrupted.
SERVICE FAIL X X The instrument’s service data is missing
or has become corrupted.
THRU PATH FAIL X A failure was detected in the
through-path circuit of Channel 2.
THRU FAIL X
VCO/COUNT CHAIN FAIL X A failure was detected in the VCO or the
Count Chain.
VCO/CNT FAIL X