Filter
Top Products
Chapter 2 Operating Your Frequency Counter
Using Power Correction
Operating Guide 2-37
2
6 Use the right-arrow key to move to each of the remaining digits in
the frequency setting, and use up- and down-arrow keys to adjust
their values, if necessary.
The currently selected digit flashes to indicate that it is the one that
changes when you press the up- and down-arrow keys. You can also use
the left-arrow key to back up to a previous digit, if necessary. However,
be aware that the digit to the left of the one you are adjusting increments
automatically to the next higher or lower value when the value of the
currently selected digit exceeds nine or is incremented below zero.
7 To adjust the loss value, press the right-arrow key while the digit
in the tenths position of the frequency value and the pointer to
the right of “GZ” are flashing.
The pointer at the right end of the display changes direction, and the first
digit (tens position) of the loss value flashes. You can now adjust its value
using the up- and down-arrow keys.
8 Use the left- and right-arrow keys to navigate to the remaining
digits in the loss setting, and adjust their values (if necessary)
with the up- and down-arrow keys.
9 Press the Sign (+/–) key to change the sign of the loss value
(if necessary).
dB
dB