Filter
Top Products
Installation
6
Owner's Responsibilities
Installation responsibilities prior to service
startup inspection
You are entitled to a free startĆup inspection serĆ
vice by our factory ASAP. Before a factory repreĆ
sentative arrives to perform a startup procedure,
the owner must already have satisfied the followĆ
ing requirements.
1. Oven(s) are uncrated, stacked (if applies) and
put in place.
NOTE: Please refer to Leg Attachment and
Stacking.
Maximum shelf loading - 60 lbs (27.3 Kg)
PLUMBING SPECIFICATIONS
BCXĆ14G/AA, BCXĆ14E/AA
BXĆ14G/AA, and BXĆ14E/AA
CNVXĆ14G/AA
CNVXĆ14E/AA
WATER
Water Pressure 30 PSI (207 kPa) minimum
50 PSI (345 kPa) maximum
Water Connection 3/4" garden hose - Hot and
Cold water
3/4" garden hose for spray
hose - Cold water only
Water Pressure
Regulator Setting
Preset to 30 PSI (207 kPa)
Minimum Requirements TDS - less than 100 parts per million
Total Hardness - 80Ć120 parts per million
Chlorides - less than 30 parts per million
pH Factor - 7.0Ć8.0
DRAINAGE
Drain Type Atmospheric Vented Drain
Drain Connection 2.00" (50.8mm) Copper
Avg Water Drain Temp. Approximately 140_F (60_C)