Filter
Top Products
Maintenance
32
Deliming (BCXĆ14 units only)
To set the deliming interval:
1. Remove power from the appliance.
2. Remove the two screws located on the side
panel. Slide the control module out of the con-
trol.
3. Turn the potentiometer to the required setting.
See Figure 23.
4. Slide the control back in, replace the two
screws.
5. Apply power to the appliance.
A PC may be connected at power up of the ap-
pliance to verify the potentiometer setting. The “De-
liming interval is x hour(s) of steam generator run
time.” Status line will show 30, 60 or 90. Refer to
Figure 25 on page 33.
Figure 23
Setting A
Setting C
Setting B
Potentiometer Settings
TP4
Figure 24