Filter
Top Products
Operation
22
Standard Controls for Models BCXĆ14 and BXĆ14
2
4
6
3
10
11
12
5
1
5
14
15
16
18
17
7
8
9
13
Figure 13
CONTROLS IDENTIFICATION
1. POWER ON LAMP - when lit indicates power
to the unit is turned on.
2. MODE SELECTOR SWITCH - turns power
to the oven on or off. Allows selection of
Steam, Hot Air, Combi or Cool Down Modes.
3. TEMPERATURE DIAL - used to set desired
cooking temperature.
4. DISPLAY - displays time and temperature inĆ
formation.
5. UP & DOWN ARROW KEYS - press to enter
values in the display.
6. ACTUAL TEMP KEY - press to display the acĆ
tual probe temperature during core cooking or
actual cavity temperature in timer mode.
7. TIME/PROBE TOGGLE KEY - used to select
either timer or probe cooking.
8. CLEAR/STOP KEY - use to clear or stop the
timer and silence the buzzer.
9. START KEY - press to start the timer.
10. STEAM ON DEMAND TIMER - used to set
duration for steam on demand.
11. STEAM ON DEMAND SWITCH - used to iniĆ
tiate steam injection cycle.
12. STEAM ON DEMAND LAMP - lights when
steam on demand is activated.
13. LIGHTS SWITCH - used to turn the lights on
and off.
14. CAVITY VENT SWITCH - used to open or
close vent to release steam from cavity.
15. FAN SPEED SWITCH - used to select fan
speed.
16. PROBE CONNECTION - used to connect
the core temperature probe to the control.
17. FILL LAMP - illuminated until the steam genĆ
erator is filled with water.
NOTE: Model BXĆ14 ovens do not have a fill
lamp.
18. DELIME LAMP (BCXĆ14 ovens only) -
Flashes when steam generator deliming is
needed. Remains steady when deliming proĆ
cess is active.
CLEAN LAMP (BXĆ14 ovens only) - Flashes
when the unit has been in use for a preproĆ
grammed time and needs to be cleaned.