Filter
Top Products
Maintenance
29
Cleaning and Preventive Maintenance
3. Rotate the two screws on the left side of the fan
guard.
Figure 20
4. Remove the fan guard.
Figure 21
5. Thoroughly spray cleaner onto the fan and
heat source. Close the door to allow the cleanĆ
er to work.
6. After ten minutes, rinse the cleaner off. Return
the fan guard to the closed position. Rotate
the two screws to secure the fan guard.
Remove and clean the blower wheel every 6
months.
BXĆ14 Boilerless CLEAN" Light
The CLEAN" light informs the user that the oven
has been in use for a preprogrammed period of
time and now needs to be cleaned. It is necessary
to clean the interior thoroughly because of the waĆ
ter minerals that will accumulate. Proper cleaning
will extend the life of your oven.
Once the oven interior has been cleaned the
CLEAN" light must be reset. To reset the light:
1. Place the oven in STEAM mode.
2. Press and hold the STEAM ON DEMAND butĆ
ton until the light flashes quickly.
3. When the light stops flashing, let go of the butĆ
ton.
4. The oven has reset and will begin counting the
time until the next cleaning.
CLEANING THE EXTERIOR
The exterior of the appliance may be cleaned and
kept in good condition with a light oil. Saturate a
cloth and wipe the appliance when it is cold; wipe
dry with a clean cloth.
WARNING!!
DO NOT spray the outside of the appliance
with water or clean with a water jet. CleanĆ
ing with a water jet can impregnate chloĆ
rides into the stainless steel, causing the
onset of corrosion.
PREVENTIVE MAINTENANCE
The best preventive maintenance measures are
āāāthe āāāproper āāinitial āāinstallation āāof āāthe equipment and
a program for cleaning the appliance routinely.
The Oven/Steamer requires no lubrication. ConĆ
tact the factory, the factory representative or a loĆ
cal Blodgett Combi service company to perform
maintenance and repairs should they be required.