Filter
Top Products
-28-
Revision 4/F3576 © Moffat Ltd, December 2004
8 Screws
Locking Nut
1) Remove R/H side panel (refer 6.2.4).
2) Disconnect wires from buzzer (secured to
insulation panel).
3) Remove two screws securing the buzzer
to its mounting bracket.
6.3.8 BUZZER
4) Transfer wires to the new timer and
reassemble in reverse order.
Figure 6.3.8
4) Replace buzzer and re-assemble in
reverse order.
1) Remove the fan baffle (refer 6.2.2).
2) Remove the eight screws securing the fan
and motor mounting plate situated at the
oven rear.
1) Remove the fan baffle (refer 6.2.2).
2) Unscrew the glass cover (anti-clockwise).
6.3.9 HOLD THERMOSTAT
6.3.10 OVEN LIGHTS
6.3.11 FAN / MOTOR
Figure 6.3.9
1) Open control panel (refer 6.2.1), and
remove right hand side panel.
2) Remove the hold thermostat knob by
pulling away from bracket.
3) Undo the two screws securing the hold
thermostat to the bracket.
4) Remove fan baffle from inside oven (refer
6.2.2).
Figure 6.3.10
5) Unclip thermostat sensing bulb from its
mounts and feed back through rear of
oven.
3) Replace the bulb (40 watt miniature
Edison screw).
Figure 6.3.12
Figure 6.3.13
Two screws
Two screws
6) Remove thermostat from oven.
7) Transfer wires to new thermostat and
reassemble with in reverse order.
Thermostat
bulb
Glass cover
Figure 6.3.11