Filter
Top Products
OPTIONAL
EQUIPMENT
SC-5 SURE CUT Servo Knife Cutter UGE059/1003
2-8 DESCRIPTION
Slide Base
This option is highly recommended for cutting flexible extru-
dates. While the cutter base is fixed and aligned with the
puller, the cutter itself is mounted on a set of linear slides that
allow as much as 12 inches of movement. The cutter can be
moved away from the puller for startup, then moved close to
the puller to enhance delivery to the cutter bushings.
Blade Wipe
The blade wipe system keeps the cutting blade clean by
removing lubricant and particles from the blade. A felt pad
sandwiched between two pieces of stainless steel and mounted
next to the bushing wipes the knife before each cut.
Custom Bushing Holder Sizes Available:
Heavy Duty Blade Positions
●●
One blade position standard
●●
Optional 2 or 4 blade positions available
●●
Optional simitare blade available (see parts list for optional
blades.)
Round Profile
2.25 inch (standard) 2x4 inch
3.25 inch 2x6 inch
4.25 inch 2x8 inch
5.25 inch 2x10 inch
3x6 inch
4x7 inch