Filter
Top Products
Align the cutter with the extrusion line.
Measure the centerline height of the extrudate as
it exits the extrusion die. Adjust all equipment on the extrusion
line (sizing tank, cooling tanks, belt puller, and cutter) to this
height.
Adjust the cutter's floorlock/caster assembly
to the center height of the extrusion line using a 16- or
18-inch adjustable wrench. Once the correct height is
reached, adjust the pad assembly to remove the weight
from the casters for operation. This minimizes machine
vibration during the cutting cycle.
Use a plumb line or laser to check for a
straight line
from the extrusion die through each line
component to the cutter bushings. Adjust as necessary.
UGE059/1003 SC-5 SURE CUT Servo Knife Cutter
INSTALLATION 3-5
4
5
6
3
POSITIONING
THE
SERVO
CUTTER
CONTINUED