Filter
Top Products
OPERATION 4-27
UGE059/1003 SC-5 SURE CUT Servo Knife Cutter
PREVENTIVE MAINTENANCE SOFTKEY
Pressing the soft key located under the word P/M on the
Maint. area screen. Selects the P/M area screen. Three pre-
ventive maintenance sub-menus for monitoring Inputs, Time
and Cycles are displayed.
Additional information on how to access this screen can be
found in the Maintenance Area of the operator display
overview in Appendix E of this manual.
Inputs Softkey
Pressing the soft key located under the word Inputs on the
P/M area screen, selects the inputs monitoring screen.
This screen displays the cutters input status. Active inputs are
equal to On and de-energized inputs are equal to Off. This
information could be used for troubleshooting with out the
use of a meter.
Input #1 = End Sense Trigger when On
Input #2 = Run when Off
Input #3 = Manual Cut Trigger when On
Input #4 = Home Registration when On
Input #5 = E-Stop when Off
Input #6 = Spare
Exit or Prev, Pressing Exit or Prev returns the display to the
Select P/M area screen.
CONTROL
INSTRUCTIONS
PREVENTIVE
MAINTENANCE