Filter
Top Products
2. To disable SureVend™, press the ↵ (Edit) key to
enter the SureVend On/Off screen. Use the ▲
(up) key to select Off (indicated by the filled
radio button).
3. Press the ↵ (Edit) key to confirm the selection and return to the SureVend screen.
Verify that the status line at the bottom of the screen displays Off when SureVend
is highlighted.
4. Pressing the X (Exit) key will move back to the Product Configuration screen and
save the new parameter to the machines memory.
7.5 Coins In/Out Menu
N.B. Coins In/Out will only be displayed on machines fitted with an MDB coin mech.
The Coins In/Out menu emulates the coin mechanism from the front end screen and
allows the operator to view information relating to the coin mechanism and eject coins
from the machine without opening the door.
1. From the Main Menu screen use the
▼ (down)
key to scroll through the menu until Coins
In/Out is highlighted. Press the ↵ (Edit) key to
access the menu screen which will look similar to
the example shown.
2. From this screen the operator can view the coin sets in the coin mechanism, the
number of coins in each coin stack and the total value of the coins. To eject coins
from the mechanism the operator simply presses the relevant button on the
keypad eg pressing button 4 will eject a 50p coin. The count will reduce to 7 and
the value to 3.50.
7.6 System Settings Menu
This menu allows the operator to view information
relevant to the machine and its location, set the
current time and date, set and view DTS information,
backup and restore machine software, view the
machine and I/O board software versions installed in
the machine and set temperature and idle screen
display options.
N.B. Custom Messages is not supported at this time.
Operators Manual
49
Coins In/Out
Press
1
2
3
4
Coin
0.05
0.10
0.20
0.50
Count
34
18
9
8
Value
1.70
1.80
1.80
4.00
System Settings
Press EDIT to Select
Machine Information
Clock
DTS
Backup/Restore
Software Version
I/O Board Software
Temperature Units
Idle Screen Options
Custom Messages