Filter
Top Products
N.B. It is also possible for the operator to programme Backup as a timed event, thus
ensuring even greater security for the information stored in memory. This ensures that
the machine can easily be restored to its last operational state should the information
be lost through corruption or power failure. For full details see page 60.
1. Scroll down and highlight Backup/Restore from
the System Settings menu. Press the ↵ (Edit) key
to access the menu. If this is the first time that a
backup has been selected the LCD will display
the screen as shown.
2. Press the ↵ (Edit) key to access the menu. The
LCD will display the screen as shown. To backup
the memory press the ↵ (Edit) key. After a few
seconds the machine will beep once and the
Initialising screen will be displayed before the
machine returns to standby mode, ready to vend.
3. When accessing the Backup/Restore sub-menu
after backups of the memory have been made,
the information changes and the operator is
presented with the screen as shown. The first
sub-menu, Last Backup is highlighted with the
date and time this occurred displayed at the
bottom of the screen.
4. To restore the machines memory to the last
available backup, scroll down using the
▼ (down)
key, highlight Restore Data and press the ↵ (Edit)
key to access the menu. The LCD will display the
screen as shown. Press the ↵ (Edit) key to
restore the backed up data. After a few seconds
the machine will beep once and the Initialising screen will be displayed before the
machine returns to standby mode, ready to vend.
5. Software Version: The Software version menu displays the version number of the
software installed and is for information only. The menu also displays the current time
and date.
6. I/O Board Software: This menu displays the version number of the I/O board
software installed and is for information only.
Operators Manual
53
Backup/Restore
Press EDIT to Select
Backup Data
Backup Data
Are you sure you want
to backup all
NVM data?
CANCEL - EXIT OK - EDIT
Backup/Restore
23-09-05 11:17
Last Backup
Backup Data
Restore Data
Restore Data
Are you sure you want
to restore the data
from the backup?
CANCEL - EXIT OK - EDIT