Filter
Top Products
7. Temperature Units: This menu allows the
operator to change the way that the temperature is
displayed, either °C or °F, on the LCD when the
machine is in standby mode. Use the ▲ (up) or ▼
(down) keys to set the required option followed by
the ↵ (Edit) key to store/save it (indicated by the filled
radio button).
8. Idle Screen Options: This menu allows the operator to configure the LCD so
that it displays either the time or the time and water temperature with the standby
message when idle. To configure the idle screen options, proceed as follows:
1. From the System Settings menu press the
▼ (down) key to highlight Idle Screen
Options and press the ↵ (Edit) key to access the menu.
2. Press the
▼ (down) key to highlight the required option, eg Time and Temp
(indicated by the filled radio button). The LCD
will display the screen as shown opposite. Press
the ↵ (Edit) key to return to the System Settings
screen. With Idle Screen Options highlighted,
verify that the status line confirms the option is
set to Time and Temp.
3. Press the X (Exit) key until the machine exits the
engineers program into standby mode. The LCD
will display the standby message with the time
and date as shown.
7.7 Security Codes Menu
The security code for entry into the Operators Program is factory set so that the
operator presses button 1 on the service keypad followed by the sequence 2-2-2-2 on
the drink selection keypad. On no account should this code be altered without first
consulting your supervisor or manager.
7.8 Timed Events Menu
1. Time of Day Events: From this menu the operator can set up inhibited vend
periods, free vend periods and discounted vend periods.
The following example describes how the operator can program the machine to free
vend specific drink selections between 10.30 am and 2:30 pm on week days.
Operators Manual
54
Please Make
a Selection
Time: 10:45 Temp: 90C
Temperature Units
Celsius ( °C)
Fahrenheit ( °F)
Idle Screen Options
Time
Time and Temp
None