Filter
Top Products
As the operator presses the final zero, the AM
value will appear within a dotted box and the
text at the bottom of the LCD will now read
‘Press Arrows To Select’. Press the ▲ (up) or
▼ (down) key until PM appears in the box.
Pressing the ↵ (Edit) key will move back to the Clock menu screen and save the
new time to the machines memory. Confirm that the status line at the bottom of
the screen displays the correct time when Time is highlighted.
N.B. When set to 12 hour format, the program will only allow the operator to
set the numbers 0 or 1 in the first field. Once the number 24 has been entered
via the
▲ (up) or ▼ (down) keys to indicate 24 hour format, the operator can
reset the first two values to reflect 10:30 PM in 24 hour format e.g. 22:30.
3. Daylight Saving: From the Clock menu screen
press the
▼ (down) key to highlight the Daylight
Saving menu followed by the ↵ (Edit) key. The
LCD will display the screen as shown opposite.
By default daylight savings time is set to Off. To
choose one of the available options, press the
▲
(up) or ▼ (down) key until selected (indicated by the filled radio button) followed
by the ↵ (Edit) key. Ensure that the required setting is displayed in the status line
at the bottom of the screen. Press the X (Exit) key to return to the main menu.
3. DTS: Entry into this menu allows the operator to configure the machine in order
to send audit data relating to sales and events stored in the machines memory to a
data carrier or other device.
Data Transfer Standard (EVA-DTS) - Overview: The standard makes it possible
to transfer information from vending machines/payment systems to PC-based
accounting/management systems and/or the opposite way. It is important that all
suppliers of vending machines and payment systems agree to a common standard for
the Electronic Data Transfer, because only this way the operator can be sure that all
his equipment can be read out and programmed by means of the same handheld
terminal.
1. DTS Standby Mode: Scroll down and highlight
DTS from the System Settings menu. Press the ↵
(Edit) key to access the menu. The LCD will
display the screen as shown. The first sub-menu
DTS Standby Mode is highlighted with its current
state (DDCMP) shown in the bottom line.
Operators Manual
51
Daylight Savings Time
North American
US 2007
European
Australian
Off
Time
Press Arrows To Select
hh / mm / mode: 12 / 24
PM10
:
30
DTS
DDCMP
DTS Standby Mode
DTS Audit List
CA304 Data Type
Data Reset Mode
Event Reset Mode
Printer Baud Rate