Filter
Top Products
2. Press the ↵ (Edit) key to access the State sub menu.
Using the ▼ (down) key, set the state to On
(indicated by the filled radio button). Press the ↵
(Edit) key to return to the 1 (Timed) screen. Verify
that the status line confirms the State is set to On.
3. Press the
▼ (down) key to highlight Event Type.
By default the event is set to Timed as indicated
by the text displayed in the status line at the
bottom of the screen. Therefore it is not
necessary for the operator to enter this sub menu.
4. Press the
▼ (down) key to highlight Start Time and press the ↵ (Edit) key. From
this menu the operator sets the time at which
the the sanitation event will start. Using the drink
selection keypad, press the sequence 0-7-0-0 to
set the time. If necessary use the
▲ (up) or ▼
(down) key until AM appears in the dotted box.
5. Press the ↵ (Edit) key to return to the 1 (Timed) screen. Verify that the correct
start time is displayed in the status line at the bottom of the screen.
6. Press the
▼ (down) key to highlight Days Of Week and press the ↵ (Edit) key.
From this menu the operator can set the days on
which the sanitation event will take place. To
select everyday (Monday - Sunday), press the
START/? key on the drink selection keypad. The
program automatically places an X in every box
indicating that each day is selected.
N.B. To select individual days, scroll through the menu using the
▲ (up) or ▼
(down) keys until the required day is highlighted. Press the ↵ (Edit) key to select
the day, indicated by an X appearing in its adjacent box.
7. Press the X (Exit) key three times to return to the Timed Events Menu. Using
the sequence described above the operator can quickly and easily set up additional
sanitation event periods for the machine.
It is also possible for the operator to program up to six post vend sanitation events.
The following example describes how the operator can program a post vend event to
flush the water system 12 minutes after each vend.
Operators Manual
58
Start Time
Press Arrows To Select
hh / mm / mode: 12 / 24
AM07
:
00
Days of Week
Start = Set or Clear All
Monday
Tuesday
Wednesday
Thursday
Friday
X
X
X
X
X
State
Off
On
1
Timed
State
Event Type
Start Time
Days Of Week