Filter
Top Products
PostScript
4-8
setpapertray
integer setpapertray —
changes the active paper source for the next page through the end of job by
setting the PageSize entry in the page device to the size loaded in the selected
source and by setting MediaPosition to the selected source. This operator
executes a setpagedevice.
The PageSize Policy page device parameter is not altered by this operator.
Use the following
integers to set the paper tray:
0 Tray 1
1 Tray 2
2 Multipurpose Feeder or Envelope Feeder
3 Manual Paper
4 Manual Envelope
5 Tray 3
7 Multipurpose Feeder
8 Tray 4
9 Tray 5
Notes:
• If the Manual Paper or Manual Envelope source is selected, the Manual-
Feed page device parameter is set to
true.
•A rangecheck error is returned if a paper source that is not installed is
selected.
•If a setpapertray operator is issued for the back of a duplexed page, the
printer ejects a blank back page, changes the paper source, and prints the
information for the back side of the page on the front side of a page from
the new paper source.
The setting returns to the user default setting for the
Paper Source menu item at
the end of the print job.
Errors: rangecheck, stackunderflow, typecheck