Filter
Top Products
PCL
2-56
GL/2 Commands
Note: GL/2 is not a stand-alone plotter emulation. It can only be entered from within
PCL emulation and cannot be used with software without a unique printer
driver written explicitly for GL/2.
The following tables list the GL/2 commands by group. To determine which GL/2
commands your printer supports, see “Table A-2: GL/2 Commands” on page A-6.
ESC
Z Display Functions Off
Turns off Display Functions; resumes normal command processing.
ESC
z Print Test Page
Causes a test page to print.
ESC
*o#M(b)
-1 Ink Saver
0Normal
1Best
Print Quality
Selects the print quality setting for the page.
ESC
&l#M(b)
0 Plain Paper
1Bond
2 Coated Paper
3 Glossy Paper
4 Transparency
101 Photo Paper
102 Card Stock
103 Labels
104 Envelope
105 Letterhead
106 Preprinted
107 Colored Paper
108 Iron On
Paper Type
Selects the paper type setting for the page.
Table 2-27: Configuration Group
Command / Parameter Command Name
CO "text" Comment
DF; Default Values
IN (n); Initialize
IP (X
P1
, Y
P1
(, X
P2
, Y
P2
)); Input P1 and P2
Table 2-26: Miscellaneous Commands (Continued)
Command / Parameters Function / Result