Filter
Top Products
PostScript
4-59
PostRenderingEnhance
Details
dictionary Describes enhancements that are made to the output after the page has been
held in memory.
REValue is an integer that specifies the current value of the PQET menu item.
Supported values are:
0 PQET is Off.
1 to 4
PQET is On (default is 1).
Type is a constant value. To find the value of Type for your printer, see
“PostRenderingEnhanceDetails” on page C-7.
PowerSave integer A value of 1—120 or 1—240 (model specific) indicates the number of minutes that
elapses after the last page prints and before the Power Saver feature is invoked.
A value of 0 (zero) indicates the Power Saver feature is turned Off on some
printer models.
Note: Some printer models released in the year 2000 or later designated as
Energy Star printers cannot have Power Saver disabled.
This value is initialized at the start of each PostScript emulation job to the value of
the Power Saver menu item.
Note: This parameter can only be modified within a system administration job.
ProcessColorModel name or
string
Specifies the color model to use for rendering process colors in the printer.
Supported values are:
DeviceGray
DeviceRGB
DeviceCMYK
DeviceCMY
Punch integer Requests holes to be punched in the output page. The format for setting the
Punch key is:
<</Punch n>> setpagedevice
where n is one of the following values:
0 Do not punch holes in the output page.
3 Punch holes in the output page.
SlipSheet integer Specifies where blank separator sheets should be inserted in the output.
Supported values are:
0 Do not insert separator sheets.
1 Insert a separator sheet at device deactivation.
2 Insert a separator sheet at the end of the print job.
3 Insert a separator sheet at the end of each set in a multicopy job.
If Collate is set to True, a set consists of one copy of each page of the
document. For example, if a print job is five pages long, a set is one
copy of pages one to five. If Collate is set to False, a set is all the
copies of a single page of the job. For example, if a print job is three
copies of a five page job, a set is three copies of the first page.
4 Insert a separator sheet after each showpage or copypage.
Table 4-8: Page Device Parameters (Continued)
Key Type Definition