Filter
Top Products
PJL
3-19
Printer Unique Variables for Both Printer Languages
The following variables are unique to some Lexmark printers and are supported for
both PCL emulation and PostScript emulation. Therefore, the [
command
modifier:value
] parameter should not be specified.
To determine which variables your printer supports, see “Table B-2: Printer Unique
PJL Variables for Both Printer Languages” on page B-4.
USERNAME
(SET only)
Print and Hold
Username
“username”
username is a text string truncated to 24 characters.
Note: A null (“ “) string is an acceptable value and
indicates no Print and Hold Username is specified.
NULL
(No username)
WIDEA4 A4 width NO, YES
NO indicates the A4 width is 198 mm.
YES indicates the A4 width is 203 mm.
NO
Table 3-4: Printer Unique Variables for Both Printer Languages
Variable Function Selections Factory Default
LACTIVEBINRESET
(DEFAULT only)
Active Bin
Reset
MANUAL, AUTOMATIC MANUAL
LADVANCEDSTATUS
(DEFAULT only)
(Port specific)
Advanced
Status
ON, OFF
ON enables parallel bidirectional support.
OFF disables parallel bidirectional support.
ON
LALARMCONTROL
(DEFAULT only)
Alarm Control OFF, SINGLE, CONTINUOUS SINGLE
LAUTOCRLF Auto CR after
LF
ON, OFF OFF
LAUTOLFCR Auto LF after
CR
ON, OFF OFF
LBLANKPAGES Blank Pages DONOTPRINT, PRINT
Note: Some printers have a fixed value of
DONOTPRINT.
DONOTPRINT
LBONDLENGTH
(DEFAULT only)
Bond Length NORMAL, SHORT NORMAL
LBONDLOADING
(DEFAULT only)
Bond Paper
Loading
OFF, DUPLEX OFF
Table 3-3: Common Variables for Both Printer Languages (Continued)
Variable Function Selections Factory Default