Filter
Top Products
PJL
3-13
CPLOCK
(DEFAULT only)
Disables menus ON, OFF
ON disables the printer operator panel menus.
OFF enables menus.
OFF
DENSITY Print Darkness 1 to 5
To determine the default value of your printer, see
“Table B-1: Common Variables for Both Printer
Languages” on page B-1.
2, 3, 4
(Model specific)
DUPLEX Duplex ON, OFF OFF
ECONOMODE Toner Saver ON, OFF OFF
FORMATTERNUMBER
(READ only)
Unique printer
identifier
The value of the NVRAM serial number field is
returned.
The NVRAM serial number field is set to the printer
serial number. In order to guarantee that a unique
identifier exists in this field, the printer writes a random
alphanumeric string into this field whenever the critical
byte area in NVRAM is re-initialized.
Set by printer
manufacturer
FORMLINES Lines per page 1 to 255
Note: If a value greater than 255 is specified by a SET
or DEFAULT command, the value is changed to 255.
60, 64
(Country specific)
HOLD
(SET only)
Print and Hold ON, OFF, STORE, PROOF
The HOLD variable interacts with the HOLDKEY and
HOLDTYPE variables. For more information, see
HOLDTYPE on page 3-14.
OFF
HOLDKEY
(SET only)
Print and Hold PIN “PIN”
PIN is a text string consisting of exactly four numerals.
Only the numerals 1 through 6 are valid.
Note: A null (“ “) string is an acceptable value and
indicates no PIN is specified.
The HOLDKEY variable interacts with the HOLD and
HOLDTYPE variables. For more information, see
HOLDTYPE as follows.
NULL
(no PIN)
Table 3-3: Common Variables for Both Printer Languages (Continued)
Variable Function Selections Factory Default
• 1 = Lightest
• 2 = Lighter
•3 = Normal
•4 = Darker
•5 = Darkest