Filter
Top Products
1-7
SECTION 1
DESCRIPTION
F. Air Fingers
The Air Finger Assemblies are made up of three parts as
follows (See Figure 1-8):
1. Outer Plate-The Outer Plate is the removable covering with
tapered holes, which directs the air stream onto the product to
be baked. Outer plates are manufactured with 1 row of holes (L1
finger), 3 rows of holes (L3 finger), 6 rows of holes (L6 finger) or
no holes (a radiant finger).
2. Inner Plate -The Inner Plate directs air through the air finger,
and is vital to forming the unique air jets.
3. Finger Manifold-The Finger Manifold is the assembly which
slides on tracks into the oven plenum. Blank plates are available
to install on the plenum where an air finger is not required. The
finger manifold contains one non-adjustable baffle, as shown in
Figure 1-8.
Figure 1-8. Fingers